ControlByWeb: WebRelay Applications

WebRelay is an electro-mechanical relay with a built-in web server. It can be controlled via the Internet or a local intranet. It is very simple to set up and use and has many features.

WebRelay is very versatile and has many applications and is limited only by imagination. Some example applications are listed below.

Control devices over the web or a local network.
Control pumps, valves, motors, coils, etc.
Turn lights on and off while using IP video cameras.
Control electronic door locks and garage door openers.
Monitor gates, doors, windows, etc.
Remotely re-boot computers, servers, etc. Click here for more information about remote reboot applications.
Connect a digital output of any PLC, industrial controller, or even a home automation system to the input of WebRelay to control another WebRelay device somewhere else on the network. Now your PLC or automation system has the ability to control devices remotely.
Extend buttons and switches to a remote location. Add a light switch in your home that controls the lights at the office across town. Put a button in your office that locks or unlocks your other office three blocks away.
Connect a WebRelay unit to a door sensor at your office, factory, store, etc. Connect a chime to another WebRelay unit in your home. Each time the door at the office, is opened, you are alerted with at chime. If the door is opened when nobody should be there, you can immediately check things out using a remote video camera.
Industrial control.
Home automation.
Security applications

back to overview page