Analog Module™ | Specifications
The Analog Module allows you to remotely monitor analog signals
Specifications
Power Requirements
- Voltage: 9-28VDC
- Max Current: 300mA Max
Analog Inputs
- Number of Inputs: 8
- Type: Can be configured as 8 single-ended, 4 differential, or a combination
- Input Range: 0-5VDC
**Note that inputs have high impedance so input range can easily be adjusted using external resistors. Example: 0 to 10 Volt or 4-20mA - Resolution: 10μV (24 bit ΣΔ ADC)
- Reference: 5.00V, 0.04%, 3ppm/C, 50mA Max
Network
- Type: 10/100 Base-T Ethernet Port
- Setup: Static IP address assignment. TCP port selectable
Connectors
- Power & Analog Inputs 1-8: 12-Position 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
- Network: 8-pin RJ-45
LED Indicators
- Number of LEDs: 3
- Power on
- Network linked
- Network activity
Physical
- Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
- Size:
- 1.41in (35.7mm) wide
- 3.88in (98.5mm) tall
- 3.1in (78mm) deep (not including connector)
- Weight: 5 oz (142 grams)
- Enclosure Material: Lexan 940 Polycarbonate Plastic
- Enclosure Flame Rating: UL94 V0
Protocols
- HTTP, XML, Modbus TCP/IP, SMTP
Password Settings
- Password protection on setup page: Yes
- Password protection on control page: Optional
- Password Encoding: Base 64
- Password Length: 10 Characters
Electromagnetic Compliance
- IEC CISPR 22, CISPR 24
- FCC 47CFR15 (class B)
- EU EN55024, EN55022
Product Safety Compliance
- IEC 61010-1
More Information:
ManualsWhere to Buy
Click "Buy Online" to view part numbers and pricing. Analog Module is available inthe USA and internationally, and can be purchased either from us or an Authorized Distributor.
