INDUSTRIAL GATE CONTROL & MONITORING
Open/close gate, monitor gate status, after-hour and keypad override, and more.
Control and monitor commercial and residential gates with ControlByWeb devices - Connect the relays to a gate controller to remotely control the gate. Monitor the gate's status with digital inputs. You can schedule the gate to open during regular business hours. You have full control over when the gate opens and you can receive text or email alerts if the gate is opened after-hours.
Use a temperature sensor to control a relay, which in turn can control a heater. The X-410 can activate the heater to prevent motor freeze up and melt ice.
- Remote & local gate control
- Monitor gate status
- Task Builder for scheduling gate lock times
- Email/text notifications
- Logging & count activity
- Emergency Override
- And more ...
*The above illustration is for demonstration purposes only, it does not represent actual wiring. Appropriate gate sensors needed.
Security Gate Control & Monitoring
In this example, the gate's motor controller is connected to one of the X-410's relays. A stand-alone keypad controller is connected to one of the X-410 inputs. When a correct code is entered into the keypad, the keypad outputs a signal to the X-410. The X-410 activates the gate's motor when signaled from the keypad or when an authorized user activates the gate through the X-410 using a web browser or CBW Mobile app. The X-410 also monitors whether the gate is open or closed by connecting a switch or sensor to another input on the X-410.
Limit access during scheduled times.
The X-410 can be easily programmed so that after 10PM, the gate cannot be opened from the outside of the facility; however, a loop detector connected to a digital input allows the gate to be automatically opened from the inside until 11PM. After 11PM, the relay is disabled and the gate remains closed unless opened by an authorized user. If the gate is opened after-hours, it sends an email/text alert to key personnel.
Monitor Motor Temperature
In our example, the X-410 has a temperature sensor to monitor the motor temperature. A heater is wired to the X-410 so when the temperature gets too low, the X-410 can turn on the heater to prevent the motor from freezing.
No Cloud Services or Monthly Fees
The X-410 is a stand-alone, independent device. There are no monthly fees, and no software to install.
BEST PRODUCTS for Gate Control and Monitoring
- BASIC Interpreter
- Email Alerts
- 1 Relay
- 1 Digital Input
- 1-Wire Temp/Humidity Bus
- BASIC Script
Wireless solution for simple monitoring and control.
- 1 Relay
- 1 Digital Input
- Automatic Reboot
Cost effective solution for simple monitoring and control.
BEST SENSORS for Gate Monitoring
Heavy duty contact-closure sensor for general industrial applications