Wiring & Installation | Support
How to install ControlByWeb devices and to wire them to I/O devices.
Browse by Topic
Tutorials
Extending 1-Wire Temp/Humidity Sensors
Many factors determine the maximum length of the cable, including: Sensor network topology, sensor type, number of sensors, cable type, cable length, ambient electromagnetic...
More ❯
Can ControlByWeb units be installed in outdoor locations?
ControlByWeb units are designed with wide operating temperature ranges but do not have any special protections against moisture. They are best suited for...
More ❯
Which power supply should I use?
We offer products with several different power supply options: Industrial products that have a part number that ends with an "-I" These products require a DC power supply within...
More ❯
How do I protect my ControlByWeb devices from over-voltage conditions (e.g., Lightning)?
Learn how to reduce the risk of over-voltage conditions, such as lightning damage to ControlByWeb products. This briefly describes where lightning protection ...
More ❯
XW-110 Installation for Walk-in Freezers
In this video you will learn how to physically install the XW-110 with an external temperature sensor to wirelessly monitor a walk-in freezer.
More ❯
X-600M Wiring and Installation
This X-600M video shows how to mount the X-600M to a DIN-Rail, how to wire it to a power supply, connect it to expansion modules, and connect it to your network.
More ❯
How do I connect expansion modules?
The X-400, X-400C, and X-600M can be expanded with expansion units. Expansion units provide the main unit with additional I/O that all report back to the master device’s dashboard.
More ❯