WebRelay™ | Single Relay and Input Module
WebRelay is an electrical relay (or electrical switch) with a built-in web server. The relay can be turned on, off, or pulsed using a web browser. It has a long history of reliable operation in many applications including remote reboot, industrial control, security, and remote control and monitoring.
WebRelay, can provide remote relay control in countless applications including pump and motor control, security lock systems, remote reboot, and lighting control. WebRelay's powerful and flexible design make imagination its only limit.
WebRelay also has an optically isolated input that can be used to monitor the state of devices, control the relay, or control a remote relay somewhere else on the network. This feature is useful to extend the output of a PLC to another building or to allow a switch to control a device in another state.
WebRelay™ provides reliable remote relay control and discrete signal monitoring over any IP network. WebRelay, can provide remote relay control in countless applications including pump and motor control, security lock systems, remote reboot, and lighting control.
WebRelay's powerful and flexible design make imagination its only limit.
- Control devices such as pumps, valves, motors, coils, etc. over the web or a local network.
- Turn lights on/off while using IP video cameras.
- Control electronic door locks and garage door openers.
- Monitor gates, doors, windows, etc.
- Home automation.
- Security applications
- Remotely reboot computers, servers, etc. (PDF)
- Connect a digital output of any PLC or industrial controller to the input of WebRelay to control another WebRelay device somewhere else on the network.
- Extend buttons and switches to control devices from a remote location.
- Connect a WebRelay unit to a door sensor at your office, factory, store, etc.
- No programming required
- Full control using a standard web browser or text-based XML messages
- Can operate as a Modbus/TCP slave
- Password protected
- 12A relay contacts
- ON/OFF or Pulsed relay modes
- Optically-isolated input uses:
- Relay control
- Remote relay control (peer-to-peer)
- Auto-Reboot controller mode for remote reboot of network devices
- Selectable TCP ports
- Removable terminal connectors included
- DIN rail or wall-mount
- Power supply options:
- POE and/or 9-28VDC
- Five-Year Warranty
Simply connect the relay contacts to the device to be controlled, and switch the relay on and off remotely using a web browser (see Figure 1).
WebRelay provides an optically-isolated input which allows you to monitor the state of a device or control the relay contacts by applying a voltage.
WebRelay can even be used without a computer (once setup is complete) by connecting two units together. This is done by connecting a switch or applying a control voltage to one unit, and connecting a second unit at a remote location to the device to be controlled.
Figure 2 illustrates how a PLC can control a motor in another building by using two units.
WebRelay Part Numbers (Differences highlighted in green)
|PART NUMBER||OUTPUTS||INPUTS||POWER SUPPLY|
|X-WR-1R12-1I-I||Relays: 1 (12A 240VAC, 30VDC)||Digital: 1 (4-26 VDC)||9-28VDC|
|X-WR-1R12-1I-E||Relays: 1 (12A 240VAC, 30VDC)||Digital: 1 (4-26 VDC)||POE and/or 9-28VDC|
Replaced with X-WR-1R12-1I-E*
|Relays: 1 (12A 240VAC, 30VDC)||Digital: 1 (4-12VDC)||POE Class 1 (0.44 to 3.84 Watt) or 5V±5%|
Replaced with X-WR-1R12-1I-I*
|Relays: 1 (12A 240VAC, 30VDC)||Digital: 1 (4-12VDC)||9-28VDC|
Replaced with X-WR-1R12-1I-I*
|Relays: 1 (12A 240VAC, 30VDC)||Digital: 1 (11-26VDC)||9-28VDC|
* New models are backwards compatible. There have been no firmware changes.