X-13s™ | Specifications

Power Requirements

• Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
• Max Current: See table below for typical values at 25°C.

Power Supply	All Thermocouples Open	All Thermocouples Good
9 VDC	49 mA	17 mA
12 VDC	37 mA	13 mA
24 VDC	20 mA	8 mA

Thermocouple

• Number of channels: 2 Channels
• Thermocouple: Type-K
• Linear Range: -200°C to 1250°C
• Operating Ambient: -40°C to 85°C (internal cold junction compensation)
• Resolution: 0.027°C
• Drift: 4ppm/°C typical, 15ppm/°C max
• Type: Inputs are not isolated, only use ungrounded thermocouples
• Input Current: Differential, ±165nA max
• Error Detection Detects sensor breakage or disconnection of lead wire

Connectors

• Type: Miniature size, Omega PCC-SMP Series, Type-K
• Mating Connector: Miniature size, SMP
• Expansion Connector: Ribbon cable, 10-conductor, polarized, 2x5-position, 0.100" pitch Provides power and communications for expansion modules (Communications: RS-485)

LED Indicators

• Number of LEDs: 3
  • Power on
  • "Open Thermocouple (Channels 1-2)

Physical

• Size:
  • 1.41in (35.7mm) wide
  • 3.88in (98.5mm) tall
  • 3.1in (78mm) deep (not including connector)
• Weight: 4.8 oz (136 g)
• Enclosure Material: Lexan 940 Polycarbonate Plastic
• Enclosure Flame Rating: UL94 V0

Environmental

• Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
• Storage Temperature: -40°F to 185°F (-40°C to 85°C)
• Humidity: 5-95%, non-condensing
• Altitude: Up to 2,000m
• Indoor use or NEMA-4 protected location