X-19s™ | Buy Online
The X-19s expansion module has 16 relays, 16 digital inputs, and 4 analog inputs which can be controlled and monitored using an X-400 or X-600M controller.
X-19s | 16 Relay, 16 Digital and 4 Analog Input Expansion Module
Relays: 16 SPST
Digital Inputs: 16 (4-28VDC)
Analog Inputs: 4 (0-5VDC)
9-28 VDC (24V recommended)*
Quantities 1-9: $319.95
Quantities 10+: $303.95
Please contact us for high quantity discounts
* This device is sold as a component and does not include a power supply. The X-18s, X-19s, and X-20s expansion modules are not powered through the expansion bus cable and require separate wiring to the power supply. They may share the same power supply that is used to power the X-400 or X-600M controller or they may use separate power supplies. Please use the same power supply voltage for all devices on the expansion bus (24V recommended).
Expansion cables (10-conductor ribbon cable) are necessary to connect expansion modules to an X-400 or X-600M controller. The large expansion modules (X-18s, X-19s, and X-20s) have two expansion ports, and come with a 5-inch expansion cable with two connectors which allows it to connect to the X-400 or X-600M along with other expansion modules.
We recommend to first connect all large expansion modules to the X-400 or X-600M, and then connect any smaller expansion modules (X-11s, X-12s, X-13s, X-15s, X-16s, X-17s). See Example
To know which expansion cable you need, fill out the form below:
Expansion cable (2 connectors): $10.00
+$5.00 per additional connector
How many expansion modules will be connected to an X-400 or X-600M Controller:
|LARGE expansion modules
(X-18s, X-19s, X-20s)
SMALL expansion modules
(X-11s, X-12s, X-13s, X-15s, X-16s, X-17s)
You will need the following expansion cable: No additional cable needed
*You cannot have more than 64 expansion modules per X-600M controller or 32 expansion modules per X-400 controller.
**If you have more than 32 expansion modules, a power injector will be required.