X-332™ | Live Demonstration
X-332 | 16 relays, 16 digital inputs, 4 analog inputs, 2 counter inputs, up to 4 temperature/humidity sensors, and a built-in web-server. Allows remote access from many devices along with infinite control and monitoring possibilities.
Live X-332 Demonstration
For your convenience we have set up a live X-332 unit for testing and evaluation. By clicking the links below you have full access to this live unit. You can make changes to the configuration and settings through the setup pages and you can control X-332 through its control page. The control page allows you to change the state of the relay and view the current state of the input.
The diagram illustrates how this demonstration is wired. Nothing is connected to the relay contacts; however, you can still turn the relay on and off to see how it works. The X-332 is also wired to a temperature sensor that can be monitored through its control page.
The input state only changes when a voltage is applied to the input. For this demonstration, we have connected another one of our X-332 controllers to the input of the X-332. You can apply a voltage to the input of the X-332 by accessing the control page for the X-332 (Digital Input Control Page).
- Multiple users may be accessing this device simultaneously so the device can change while you are using it.
- This unit will be reset to factory defaults daily at 2:30AM MST.
- Please DO NOT change network or password settings.