The XW-111™ is an easy-to-use, wireless digital input monitoring device with a built-in web server. It can sense the state of up to two switch-state closure sensors.
The XW-111 monitors and reports the status of switch closure sensors and alarms. It’s ideal for applications where a device’s status must be monitored and Ethernet wiring is not accessible or practical to install. This could include push buttons, magnetic door alarm switches, micro-switches, or any device with a relay or switch closure output.
XW-111 Features
Input Status Monitoring
Built-In Web Server
Email Notifications
AC Power Failure Notification*
*This feature requires AA batteries to be installed and backup power must also be provided to the local network that provides *This feature requires AA batteries to be installed and backup power must also be provided to the local network that provides internet connectivity. connectivity.
Wireless Digital Input Applications
As a standalone device, the XW-111 is a great solution in applications where hard wiring isn’t practical or convenient. Some examples include:
Door Open/Close
Window Open/Close
Motor On/Off
Water Leak Detector
Mechanical Switch/Push-Button
Loop Detector
Once connected to a network, you can access the input’s setup and control pages on a web browser where you can adjust the settings or view the current input status on the XW-111’s control page.
Specifications
Power Requirements
Voltage: 2AA batteries, or external 5VDC power supply
Max Current: 500ma max (via DC power wall adapter)
DC Jack:5.5mm barrel x 2.5mm center pin (positive)
Battery
Internal:Two replaceable 1.5V “AA” cells
Power Consumption:27-770uA sleep, 59mA active RX, 229mA TX (at +12dBm)
Battery Life:Up to 1-year, depending on mode, security and reporting frequency. Battery life is affected by mode, reporting interval, security, DHCP, DNS, battery temperature, and other variables.
Battery Usage:Battery voltage is measured and periodically reported
Wireless
Network Standards: IEEE 802.11 b/g/n
Frequency Band: 2.412 – 2.462 GHz
Wi-Fi Security Standards: Open, WEP, WPA, WPA2
Network Settings: DHCP or Static
Wireless Range: Up to 250ft (typical for Wi-Fi devices) depends on environment
Antenna: Integral chip antenna, 1.9 dBi.
RF Output Power (typ): 14dBM (802.11b/g), 12dBM (802.11n)
Operation
Provisioning: Via internal web server (no cables or PC utilities needed)
Access Point: Yes, push button activated (setup via web page)
For your convenience we have set up a live XW-111 unit for testing and evaluation. By clicking the links below you have full access to this live unit. You can make changes to the configuration and settings through the setup pages and you can control XW-111 through its control page. The control page allows you to change the state of the relay and view the current state of the input.
Let’s make it easy with a live demo and screen sharing.
Set up a one-on-one Q & A with one of our experts. We’ll help you find the best solutions for your next project and walk you through a demonstration.
×
Schedule Free Consultation
XW-111 Setup
The diagram illustrates how this demonstration is wired. Nothing is connected to the relay contacts; however, you can still turn the relay on and off to see how it works. The input state only changes when a voltage is applied to the input. For this demonstration, we have connected one of our X-332 controllers to the input of the XW-111. You can apply a voltage to the input of the XW-111 by accessing the control page for the X-332 (Digital Input Control Page).
Important Information
Multiple users may be accessing this device simultaneously so the device can change while you are using it.
This unit will be reset to factory defaults daily at 2:30AM MST.
Please DO NOT change network or password settings.
Simplify any industrial application with the X-410™—no code necessary. Automation is easy with its web-based interface, intuitive drop-down menus, and logic editor. Integrate different devices, sensors, and protocols to create a cohesive system that responds intelligently to changing conditions. Control lights, sensors, and more with built-in I/O and expandable modules.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.