XW-111™ | Specifications
Measure and report a device's status using a digital input from this precision Wi-Fi digital input monitor. Use as a stand-alone or slave device.
Specifications
Power Requirements
- Voltage: 2AA batteries, or external 5VDC power supply
- Max Current: 500ma max (via DC power wall adapter)
- DC Jack: 5.5mm barrel x 2.5mm center pin (positive)
Battery
- Internal: Two replaceable 1.5V "AA" cells
- Power Consumption: 27-770uA sleep, 59mA active RX, 229mA TX (at +12dBm)
- Battery Life: Up to 1-year, depending on mode, security and reporting frequency. Battery life is affected by mode, reporting interval, security, DHCP, DNS, battery temperature, and other variables.
- Battery Usage: Battery voltage is measured and periodically reported
Wireless
- Network Standards: IEEE 802.11 b/g/n
- Frequency Band: 2.412 - 2.462 GHz
- Wi-Fi Security Standards: Open, WEP, WPA, WPA2
- Network Settings: DHCP or Static
- Wireless Range: Up to 250ft (typical for Wi-Fi devices) depends on environment
- Antenna: Integral chip antenna, 1.9 dBi.
- RF Output Power (typ): 14dBM (802.11b/g), 12dBM (802.11n)
Operation
- Provisioning: Via internal web server (no cables or PC utilities needed)
- Access Point: Yes, push button activated (setup via web page)
- WPS: Yes, push button activated (Wi-Fi Protected Setup)
- Connectivity: Intermittently connected or always connected
- XCD Data Packet: UDP, 10-bytes (See Appendix A)
- Remote Server (Optional): ControlByWeb's X-600M™, or cloud-based server
- Polling: state.xml (only with always-connected)
Internal Push Buttons
- Button 1: Force access-point mode
- Button 2: Activate WPS mode
Digital Inputs
- Number of Inputs: 2
- Type: Non-Isolated
- Voltage Range: 0-3.3VDC
- Current: 200K Pullup
- Minimum Hold Time: (Awake) 30mS
- Minimum Hold Time: (Asleep) 100ms
- Input Isolation: Non-Isolated
- Input Functions: Monitor State, Trigger Email Alerts, Control Remote Relays
- Edge Trigger: Rising, Falling or Both
Physical
- Location: Indoor use or NEMA-4 protected location
- Using Alkaline Batteries: -18°C to 55°C (0°F to 130°F)
- Operating Temperature: -40°C to 65°C (-40°F to 150°F)
- Storage Temperature: -40°C to 85°C (-40°F to 185°F)
- Humidity: 5-95%, non-condensing
- Size:
- 3.16 (80mm) wide
- 3.04in (77mm) tall
- 0.91in (23mm) deep
- Weight: 2.4 oz (68g), no batteries
- Enclosure Material: Lexan 940 Polycarbonate Plastic
- Enclosure Flame Rating: UL94 V0
Password Settings
- Password protection on setup page: Yes
- Password protection on control page: Optional
- Password Encoding: Base 64
- Password Length: 13 Characters
Electromagnetic Compliance
- FCC ID: 2AE4Z-XWD001
- IC: 21441-XWD001
- FCC 47CFR15 (Class B)
- IEC CISPR 22, CISPR 24
- EN55024 ITE Immunity (2010)
- EN55022 Emissions (2010)
Product Safety Compliance
- IEC 61010-1
More Information:
ManualsWhere to Buy
Click "Buy Online" to view part numbers and pricing. XW-111 is available inthe USA and Canada, and can be purchased either from us or an Authorized Distributor.
