XW-112™ | Wi-Fi Water Detector

$189.99

The XW-112™ is a standalone water leak detector that monitors the presence of liquids, sends alarm notifications, and provides real-time sensor status via the web. Includes one GRI-2605 liquid detection sensor.

1 Water Contact Sensor (included)

WiFi-Enabled (802.11 b/g/n)

Fast, secure checkout!

  • Most products ship same day
  • 30-day return policy
  • Responsive technical support
Water leak detection illustration featuring the ControlByWeb XW-112 Wireless monitor

Water leaks that go undetected can lead to major damage and equipment replacement costs. The XW-112 is a simple and effective way to detect potential leaks. With it, you can monitor for water leaks around water heaters and in server rooms, bathrooms, and areas near water tanks or pipes. The XW-112 is a self-contained device that doesn’t require any additional equipment or software to run—all you need is a local router to enable email notifications.

XW-112 Features

  • Built-In Web Server
  • Email Notifications
  • Alarm Control Through CBW Devices
  • AC Power Failure Notification*

*This feature requires AA batteries to be installed and backup power must also be provided to the local network that provides internet connectivity.

Equipment Monitoring

The above illustration shows how you could use the XW-112 to monitor for water leakage in a server room. In this example, the XW-112 is mounted in a dry area near the source of water, above the water pipes to ensure it remains dry in the event of a leak. The sensor is mounted on the ground where water would most likely accumulate.

Once mounted, the next step is to set up the XW-112 using its simple web-based dashboard. Connect to the local WiFi network and input all the information required for email notifications. Since the XW-112 isn’t dependent on cloud services or servers, it is necessary to input an email server name, login, password, etc.

Specifications


Power Requirements
  • Voltage: 5VDC power supply
  • Max Current: 500mA max (via DC power wall adapter)
  • DC Jack: 5.5mm barrel x 2.5mm center pin (positive)
Battery
  • Internal: Two replaceable 1.5V “AA” cells
  • Power Consumption: 59mA active RX, 229mA TX (at +12dBm)
  • Battery Usage: Battery voltage is measured and periodically reported
  • Battery Life: On external power failure, 3 days minimum
Wireless
  • Network Standards: IEEE 802.11 b/g/n
  • Frequency Band: 2.412 – 2.462 GHz
  • Wi-Fi Security Standards: Open, WEP, WPA, WPA2
  • Network Settings: DHCP or Static
  • Wireless Range: Up to 250ft (typical for Wi-Fi devices) depends on environment
  • Antenna: Integral chip antenna, 1.9 dBi.
  • RF Output Power (typ): 14dBM (802.11b/g), 12dBM (802.11n)
Operation
  • Provisioning: Via internal web server (no cables or PC utilities needed)
  • Access Point: Yes, push button activated (setup via web page)
  • WPS: Yes, push button activated (Wi-Fi Protected Setup)
  • Connectivity: Intermittently connected or always connected
  • Remote Server: ControlByWeb’s X-600M™, or cloud-based server
  • Polling: state.xml
Internal Push Buttons
  • Button 1: Force access-point mode
  • Button 2: Activate WPS mode
Digital Inputs
  • Number of Inputs: 1
  • Type: Non-Isolated
  • Current: 12.4K Pullup
  • Minimum Hold Time: 20ms
  • Input Functions: Monitor Liquid State, Trigger Email/Text Alerts, Control Remote Relays
  • Edge Trigger: Rising, Falling or Both
Water Sensor
  • Model: GRI 2605
  • Operating Voltage: 5 VDC
  • Operating Current: 10 mA
  • Wire Connections:
    • Red: +5V
    • Green: In
    • Black: Ground
    • White: Ground
  • Lead Wire: 6ft (1.83m)
Physical
  • Location: Indoor use or NEMA-4 protected location
  • Using Alkaline Batteries: -18°C to 55°C (0°F to 130°F)
  • Operating Temperature: -40°C to 65°C (-40°F to 150°F)
  • Storage Temperature: -40°C to 85°C (-40°F to 185°F)
  • Humidity: 5-95%, non-condensing
  • Size:
    • 3.16 (80mm) wide
    • 3.04in (77mm) tall
    • 0.91in (23mm) deep
  • Weight: 2.4 oz (68g), no batteries
  • Enclosure Material: Lexan 940 Polycarbonate Plastic
  • Enclosure Flame Rating: UL94 V0
Password Settings
  • Password protection on setup page: Yes
  • Password protection on control page: Optional
  • Password Encoding: Base 64
  • Password Length: 13 Characters
Electromagnetic Compliance
  • FCC ID: 2AE4Z-XWD001
  • IC: 21441-XWD001
  • FCC 47CFR15 (Class B)
  • IEC CISPR 22, CISPR 24
  • EN55024 ITE Immunity (2010)
  • EN55022 Emissions (2010)
Product Safety Compliance
  • IEC 61010-1

Manuals & Downloads



Accessories


 

Cloud Seat Icon

ControlByWeb Cloud Device Seat

For your convenience we have set up a live XW-112 unit for testing and evaluation. By clicking the links below you have full access to this live unit. You can make changes to the configuration and settings through the setup pages and you can control XW-112 through its control page. The control page allows you to change the state of the relay and view the current state of the input.

XW-112™


Control Page Setup Pages*

*Setup page login information:

Username: admin

Password: webrelay

XW-112 live demonstration setup

Live Demo With One of Our Sales Engineers

Let’s make it easy with a live demo and screen sharing.

Set up a one-on-one Q & A with one of our experts. We’ll help you find the best solutions for your next project and walk you through a demonstration.

XW-112 Setup

The diagram illustrates how this demonstration is wired. Nothing is connected to the relay contacts; however, you can still turn the relay on and off to see how it works. The input state only changes when a voltage is applied to the input. For this demonstration, we have connected one of our X-332 controllers to the input of the XW-112. You can apply a voltage to the input of the XW-112 by accessing the control page for the X-332 (Digital Input Control Page).

Important Information

  • Multiple users may be accessing this device simultaneously so the device can change while you are using it.
  • This unit will be reset to factory defaults daily at 2:30AM MST.
  • Please DO NOT change network or password settings.

Related Products…

  • X-410 - 4 input and 4 relay programmable controller

    X-410™ | Edge Programmable Controller

    $299.99$329.99
    X-410-I,X-410-E
    Simplify any industrial application with the X-410™—no code necessary. Automation is easy with its web-based interface, intuitive drop-down menus, and logic editor. Integrate different devices, sensors, and protocols to create a cohesive system that responds intelligently to changing conditions. Control lights, sensors, and more with built-in I/O and expandable modules.

    4 Relays

    4 Digital Inputs

    Up to 16 temp sensors

    [frequentlyBought ids="7624,34491,7540,7798"]

    View Product
  • X-408 - web-enabled digital input module

    X-408™ | Digital Input Module

    $219.99$249.99
    X-408-E,X-408-I
    The X-408™ is a web-enabled input module with eight optically isolated digital inputs perfect for dry contact monitoring.

    8 Digital Inputs

    Discrete On/Off

    Counters

    Frequency

    [frequentlyBought ids="7624,7798,7876,34091"]

    View Product
Shopping Cart