X-15s™ | Specifications

Power Requirements

• Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
• Max Current: See table below for typical values at 25°C.

Power Supply	All Opto-couplers OFF	All Opto-couplers ON
9 VDC	17 mA	88 mA
12 VDC	13 mA	66 mA
24 VDC	8 mA	36 mA

Digital Inputs

• Number of Inputs: 8
• Type: Optically-Isolated
• Voltage Range: 3-26VDC
• Current: 0.6mA @ 3V, 8.2mA @ 26V
• Minimum Hold Time: 2.5mS
• Input Isolation: 1500V
• Input Functions: Monitor State, Control Relays, Control Remote Relays, Count, Frequency, High Time, ON Time
• Maximum Count: 32-bit
• Max Count Rate: 200Hz
• Edge Trigger: Rising, Falling or Both
• High Time: Pulse width (4,194,304 seconds max)
• On Time: Accumulated time an input is asserted (4,194,304 seconds max)
• Frequency: 1Hz min, 200 Hz max

Connectors

• Inputs: 12-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
• Expansion Connector: Ribbon cable, 10-conductor, polarized, 2x5-position, 0.100" pitch Provides power and communications for expansion modules (Communications: RS-485)

LED Indicators

• Number of LEDs: 9
  • Power on
  • Digital Inputs 1-8

Physical

• Size:
  • 1.41in (35.7mm) wide
  • 3.88in (98.5mm) tall
  • 3.1in (78mm) deep (not including connector)
• Weight: 4.8 oz (136 g)
• Enclosure Material: Lexan 940 Polycarbonate Plastic
• Enclosure Flame Rating: UL94 V0

Environmental

• Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
• Storage Temperature: -40°F to 185°F (-40°C to 85°C)
• Humidity: 5-95%, non-condensing
• Altitude: Up to 2,000m
• Indoor use or NEMA-4 protected location