X-18s™ | Buy Online
The X-18s expansion module has 10 high-current relays which can be controlled using an X-400 or X-600M controller.
X-18s™ Models
X-18s | 10 High-Current Relay Expansion Module
In Stock
PART NUMBER
X-18s**
OUTPUTS/INPUTS
Relays: 10 SPDT (Form C)
POWER SUPPLY
9-28 VDC (24V recommended)*
Quantity:
* This device is sold as a component and does not include a power supply. The X-18s, X-19s, and X-20s expansion modules are not powered through the expansion bus cable and require separate wiring to the power supply. They may share the same power supply that is used to power the X-400 or X-600M controller or they may use separate power supplies. Please use the same power supply voltage for all devices on the expansion bus (24V recommended).
** This unit is an expansion module which requires an X-400 or X-600M controller, as well as an expansion cable in order to function properly.
Power Supplies
In Stock
PART NUMBER
2902992
DESCRIPTION
Output: 24 V DC±1%, 2.5 Amp
Input Voltage: 100-240V AC
Input Frequency: 50-60 Hz ±5 Hz
PRICE
$74.95
Quantity:
Power Supply | 12VDC
In Stock
PART NUMBER
PS12VW1.5-NA
DESCRIPTION
Regulated, 12V DC, 1.5Amp (100-240V AC Input)
PRICE
$19.95
Quantity:
International Power Supply | 12VDC
In Stock
PART NUMBER
PS12VW1.5-I
DESCRIPTION
Regulated, 12V DC, 1.5Amp (100-240V AC Input) - Includes EU, UK, and SAA prongs
PRICE
$21.95
Quantity:
Expansion Module Accessories
DESCRIPTION
Expansion cables (10-conductor ribbon cable) are necessary to connect expansion modules to an X-400 or X-600M controller. The large expansion modules (X-18s, X-19s, and X-20s) have two expansion ports, and come with a 5-inch expansion cable with two connectors which allows it to connect to the X-400 or X-600M along with other expansion modules.
We recommend to first connect all large expansion modules to the X-400 or X-600M, and then connect any smaller expansion modules (X-11s, X-12s, X-13s, X-15s, X-16s, X-17s, X-21s, X-22s). See Example
To know which expansion cable you need, fill out the form below:
PRICE
Expansion cable (2 connectors): $10.00
+$5.00 per additional connector
How many expansion modules will be connected to an X-400 or X-600M Controller:
| LARGE expansion modules (X-18s, X-19s, X-20s) Quantity: |
SMALL expansion modules (X-11s, X-12s, X-13s, X-15s, X-16s, X-17s, X-21s, X-22s) Quantity: |
You will need the following expansion cable: No additional cable needed
Quantity: |
*You cannot have more than 64 expansion modules per X-600M controller or 32 expansion modules per X-400 controller.
**If you have more than 32 expansion modules, a power injector will be required.
Expansion Cable with unused connector
In Stock
PART NUMBER
X-PINJECT
DESCRIPTION
Use with an Expansion Cable where a large number of expansion modules are used and additional current capacity is needed
PRICE
$19.95
Quantity:
