X-400™ | Web Enabled I/O Controller
Modular, web-enabled, industrial I/O controller that allows you to add various combinations of I/O to tailor it to your specific application. Expansion modules can either be directly connected to the X-400 through the expansion bus, or you can connect remote ControlByWeb devices through an Ethernet network, including the Internet.
Live X-400 Demonstration
For your convenience we have set up a live X-400 unit for testing and evaluation. By clicking the links below you have full access to this live unit. You can make changes to the configuration and settings through the setup pages and you can control X-400 through its control page. The control page allows you to view the current state of the X-15s' digital input and also the temperature sensor connected to the X-400.
The diagram illustrates how this demonstration is wired. Nothing is connected to the relay contacts; however, you can still turn the relay on and off to see how it works.
The input state only changes when a voltage is applied to the input. For this demonstration, we have connected one of our X-332 controllers to the input of the X-15s expansion module. You can apply a voltage to the input of the X-15s by accessing the control page for the X-332 (Digital Input Control Page) and turning the input on or off.
- Multiple users may be accessing this device simultaneously so the device can change while you are using it.
- This unit will be reset to factory defaults daily at 2:30AM MST.
- Please DO NOT change network or password settings.